MTD OEM-190-821 Operator's Manual download pdf (Page 20)

Parking Brake Adjustment

WARNING: Never attempt to adjust the

brakes while the engine is running. Always

disengage PTO, move shift lever into neutral

position, stop engine and remove key to

prevent unintended starting.

If the tractor does not come to a complete stop when

the brake pedal is completely depressed, or if the

tractor’s rear wheels can roll with the parking brake

applied, the brake is in need of adjustment. The brake

disc can be found on the right side of the transmission

in the rear of the tractor. Adjust if necessary as follows:

• Looking at the transmission from the right side of

the tractor, locate the compression spring and

brake disc. See Figure 17.

Figure 17

• Loosen, but do NOT remove, the hex nut found on

the right side of the brake assembly. See Figure 17.

• Using a feeler gauge, set the gap between the

brake disc and the brake puck at.011".

• Re-tighten the hex nut loosened earlier.

Seat Adjustment

Quick-adjust Seat (if so equipped)

WARNING: Before operating this machine,

make sure the seat is engaged in the seat

stop, stand behind the machine and pull back

on seat until fully engaged into stop.

To adjust the position of the seat on models equipped

with a seat adjustment lever, move the lever to the left

and slide the seat forward or rearward. Make sure seat

is locked into position before operating the tractor.

Knob Adjustment Seat (if so equipped)

To adjust the position of the seat on models so

equipped, loosen the two knobs on the bottom of the

seat. See Figure 18. Slide the seat forward or backward

as desired. Retighten the two knobs.

Figure 18

Standard Seat

To adjust the position of the seat, loosen the two hex

screws on the bottom of the seat. Slide the seat forward

or backward as desired. Retighten the two screws. See

Figure 19.

Figure 19

Brake Disc

Hex Nut

Compression

Spring

Set Gap

at.011"

NOTE: View shown from beneath tractor.

Transmission

Knobs

Hex Screws

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comments to this Manuals

No comments

MTD OEM-190-821 Operator's Manual Page 20

Comments to this Manuals

Related products and manuals for Lawnmowers MTD OEM-190-821