Mtd 195-746-000 User Manual download pdf (Page 5)

12. Place carriage bracket assembly (R) in position

beneath the running board support rod on the

tractor. Secure each side of carriage bracket to

frame with hex bolts (E), lock washers (F) and

hex nuts (G). Tighten securely. See figure 7.

13. Remove the round belt guard from the idler on

tractor by removing the hairpin cotter. See figure

- 8.

14. Unscrew the "L" bolt and swing the wire belt

guard on the engine pulley forward. See figure 9.

FIGURE 9

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Mtd 195-746-000 User Manual Page 5