MTD 25cc Specifications download pdf (Page 45)

Starters

Recoil Starter Removal

To remove the starter assembly:

1. Remove the clutch following the steps described in

the section on clutch removal.

NOTE: The drive shaft will come off with the clutch hous-

ing.

2. Remove the screw that hold the engine cover to the

starter housing using a T-20 torx driver.

See Figure 6.1.

3. Remove the two fuel tank mounting screws using a T-

20 torx driver.

4. Slide the fuel tank out of the starter housing.

Figure 6.1

screw

Figure 6.2

Fuel tank screws

CHAPTER 6: STARTERS

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

No comments

MTD 25cc Specifications Page 45