MTD 25cc Specifications download pdf (Page 34)

P25 Series of Engines

Fuel tank

To remove/replace the fuel tank:

1. Drain the fuel tank.

2. Disconnect the fuel lines from the carburetor.

See Figure 5.9.

3. Remove the two screws that hold the fuel tank to

the starter housing using a T-20 torx driver.

See Figure 5.10.

4. Slide the tank out to the rear.

5. Install the fuel tank by following the previous steps

in reverse order.

Figure 5.9

Disconnect the fuel lines

Figure 5.10

Screws

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

No comments

MTD 25cc Specifications Page 34