$1.00OWNEirS GUIDE• ASSEMBLY • OPERATION • MAINTENANCE • PARTS •-^andSH.P.SHREDDERSModel Numbers 242-645-000 242-648-000 242A645-000 242A648-000TMPOT
242-645, 242-648, 242A645, 242A648PARTS LIST FOR SHREDDERSREF.NO.PARTNO.CODE DESCRIPTIONREF.NO.PARTNO.CODEDESCRIPTION1 742-0571 NBladet ^ isUKiiB.40 7
TROUBLE SHOOTINGPROBLEMPOSSIBLE CAUSE (S)CORRECTIVE ACTIONEngine fails to start 1. Fuel tank empty, or stale fuel.2. Spark plug wire disconnected.3.
SAFETY RULESAWARNING: TO REDUCE THE POTENTIAL FOR ANY INJURY, COMPLY WITH THE FOLLOWING SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH T
ASSEMBLY INSTRUCTIONS“T*ATTACHING THE UPPER GUIDE ASSEMBLYFlatV h------------------Washer5/16" I.D.Hex Lock Nut 5/16-18 ThreadHex Bolt-5/16-18 X
AWARNING: Make certain the spark plug wire is disconnected and mov3d away from the spark plug before assembling the shredder.2.4.5.Hopp
ATTACHING THE CATCHER BAGYour shredder is equipped with a catcher bag to catch the shredded material.To attach the bag, place the opening of the bag o
BEFORE STARTING1. Place the shredder on a firm, level surface.2. Service engine with gasoline and oil as instructed in the separate engine manual pa
FIGURE 9.To lower the hopper assembly, use one hand to grasp the handle at the top of the hopper assembly and lift slightly. Pull up on the release b
mended at the start of each season; checl< engine manual for correct plug type and gap specifics tions.Clean the engine regularly with a cl
NOTE: When reassembling, make certain the opening on the back-up plate is toward the bottom of the K unit. The back-up plate may be reversed to provi
Comments to this Manuals