MTD E46J Specifications download pdf (Page 17)

4. Pressinwardontabontheenginebaffletoreleaseitfrom

thebafflebracket.SeeFig.7-3.

Figure 7-3

Slide belt off of engine pulley and thread through the

opening in the deck. See Figure 7-4.

Figure 7-4

6. Replace with new belt, making sure belt is firmly seated on

engine pulley while pulling from the other side and sliding

it around the transmission pulley.

7. Reattach engine baffle and reassemble blade as described

in the previous section.

8. Turn mower back over and make sure belt is seated on

the transmission pulley. Tighten screw loosened earlier to

secure belt tension spring to the transmission.

9. Reassemble front drive cover.

ReplacingBattery

WARNING: Batteries contain sulfuric acid which

may cause burns. Do not short circuit or mutilate

batteries in any way. Do not put batteries in fire as

these may burst or release toxic materials.

Loosen star knobs securing upper and lower handles and

carefully fold the upper handle down toward the lower

handle as shown in Fig. 7-5.

Figure 7-5

Remove the two screws securing battery cover to battery

housing and place them to the side. See Fig. 7-5.

Open battery cover, remove positive and negative leads

from battery, remove and replace with new battery.

Connect the positive lead to the positive side of the battery

pack, then connect the negative side.

SECTION7 -- SERVICE 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

MTD E46J Specifications Page 17