Mtd 240-685-000 User Manual download pdf (Page 8)

5. Lift up and out on the housing and rotate it 105°

clockwise. Chute opening should be to the righ"

hand side when viewed from the front of unit.

See figure 13.

6. Place the impeller guard (S) into flanges on front

of housing. Line up hole in guard with hole on

housing. Secure with one hand knob and

bellevilie washer. See figure 13.

HAND KNOB

DIRECTICiNAL

DISCHAR3E

ASSEMBLY (R)

7. Place the directional discharge assembly (R) ove>

chute opening. Secure with two hand knobs and

bellevilie washers. See figure 14.

FIGURE 14

TRUSS

BELLEVILLE

WASHER (AB)

FIGURE 15

ASSEMBLY INSTRUCTIONS

for Tow Bar Kit (Optional)

1. Remove the self-tapping screws on each side of

frame. Refer to drawing on page 12, reference

number 42.

2. Place two bar halves in position on frame. Place

one shoulder spacer (V) between frame and tow

bar. Next, place shoulder spacer (V) and hex bolt

(U) through tow bar and frame. Secure with hex

nut (W). See figure 15. Repeat for other side.

3. Secure the two tow bar ends together with truss

machine screw (X), lock washer (Y) and hex nut

(Z). See figure 15.

To attach the tow bar to a hitch, place the shouldr

bolt (AA) up through the tow bar. Place one bellevih^

washer (AB) on the shoulder bolt, then the hitch plate

and the other bellevilie washer. Cupped side of the

washers must be against the hitch plate. Secure with

hex jam lock nut (AC). See figure 15.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Mtd 240-685-000 User Manual Page 8