Mtd 240-685-000 User Manual

r$1.00OWNEirS GUIDEASSEMBLY • OPERATION • MAINTENANCE • PARTSPOWERVACUUMSliModel Numbers‘^240-675-000-Pusa 240-685-000 240-689-000 240677 240687Import

CARBURETOR ADJUSTMENTAI WARNING ^If any adjustments are made to the engine while the engine is running (e.g. carburetor), disengage all clu

6. Slide impeller and blower housing asserrrblies off crankshaft.\7. Remove belt from P.T.O. pulley and install new belt. See figure 20.NOTEWhen reas

Models 675, 685 and 689Srí^rT12

Models 675,685 and 689PARTS LIST FOR MODELS 675, 685, 689, 240677 and 240687 POWER VACUUMSREF.NO.PARTNO.COLORCODEDESCRIPTIONNewPartREF.NO.PARTNO.COLOR

I !Models 675, 685 and 68914

Models 675, 685 and 689PARTS LIST FOR MODELS 675, 685, 689, 240677 and 240687 POWER VACUUMSREF.NO.PARTNO.COLORCODEDESCRIPTONNewPart114532--638 Air Duc

Hose Attachment Kit Model 290-204-000 is available as optional equipmentREPLACEMENT PARTS • P.O BOX 360900 • CLEVELAND, OHIO 44136

C>443t>! r^l>~

I . 1

INDEXSafe Operation Practices... 3Assembly Instructions ...

AIMPORTANTIt is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this manual in a safe place for futu

1T T J mm@ ® ® wIMFIGURE 1ASSEMBLY INSTRUCTIONSCONTENTS OF HARDWARE PACK (See figure 1)A (1) Clutch Grip Assembly*B (1) Hairpin Clip*C (1) Clev

Place nozzle (N) in position on front of housing so that it rests in flanges. Secure with one hand knob (F) and belleville washer (G)

HAND KNOB (F)Place air duct assembly (P) over opening on top of housing. Secure with two hand knobs (F) and belleville washer (G). See

LOCK NUT (E)EXTENSION SPRING (D)\CLUTCH ROD (Q)7. Slide the extension spring (D) onto clutch rod (Q) as shown in figure 10. Thread lock

5. Lift up and out on the housing and rotate it 105° clockwise. Chute opening should be to the righ" hand side when viewed f

OPERATIONBEFORE STARTING ENGINE'Service engine with gas and oil. See engine manual acked with vacuum for complete instructions for care and maint