Mtd 190-459A-100 User Manual download pdf (Page 3)

ASSEMBLY

CARTON CONTENTS

1. Sweeper Assembly

2. Brace Rods (2)

3. Rope

4. Hopper Assembly

HARDWARE FOR ASSEMBLY

Hardware Is preassembled to sweeper and hopper.

TOOLS REQUIRED

(1) 1/2" Wrench

1. Remove the nuts, lock washers and bowed washers

from the two curved head bolts, leaving the bolts in

the tube at the front of the sweeper housing. See

figure 1.

2. Loosen the knob fastening the height adjustment

handle to the height adjustment strap. See figure 1.

3. Place the base of the height adjustment handle onto

the two curved head bolts and secure it with the

bowed washers, lock washers and hex nuts that you

removed. See figure 1.

4. Attach the ends of the lower hopper tubes to the

Inside of the side hopper tubes using the two 3/8" x

1/2" clevis pins and 3/32" hair cotter pins which came

preassembled to the tubes. See figure 2.

1 2 3 4 5 6 7 8 9 10 11

No comments

Mtd 190-459A-100 User Manual Page 3