.75Important:Read Safety Rules and Instructions CarefullyOWNER’SMA]\EAL18"ROTARYMOWERModel Numbers 113-011A 113-020A)Thank you for purchasing
Minor carburetor adjustment may be required to compensate for differences in fuel, temperature, altitude and load.Refer to the separate
When replacing the blade, be sure to install the blade with the side of the blade marked “Bottom” (or with part number) facing th
Models 011 and 020Meets CPSC Blade Safety Requirements12
Models 011 and 020PARTS LIST FOR MODELS 011 AND 020 ROTARY MOWERSREF.NO.PARTNO.COLORCODEDESCRIPTIONNEWPARTREF.NO.PARTNO.COLORCODEDESCRIPTIONNEWPART1 1
parts; informationPOWER EQUIPMENT PARTS AND SERVICEParts and service are available through the authorized ¡lervice firms listed below. All ord
INDEXSafe Operation Practices...3Assembly...
fvji WARNING iTo reduce the potential for any injury, comply with the following safety instructions. Faiiure to comply with the instructions ma
NOTEReference to right or left hand side of the mower is observed from the operating position.ASSEMBLY INSTRUCTIONS►NOTEJ V- «® Ì:|1tiiAjr
FourCuttingHeightsBelleville WasherYour mower has four height settings. Use thesame mounting hole for all four wheels when -assembling. See figure 4.A
End of Brake CableNOTEIt may be necessary to push the end of the brake cable using a screw- driver as shown in figure 7 to allow enough slack for th
PlasticCover14. The starter rope and handle may be secured with a plastic cover for shipping purposes. Remove the plastic cover and discard. See ----
CONTROLSBlade Handle fRecoil Starter HandleBLADE CONTROL HANDLEWARNINGTHIS CONTROL MECHANISM IS A SAFETY DEVICE, NEVER ATTEMPT TO BYPASS ITS OPERA
Blade Control HandleThrottle Control (Optional)/a StarterFIGURE 15./TO STOP ENGINE AND BLADE1. Release the blade control handle to stop the en
Comments to this Manuals