Mtd 249-645A User Manual download pdf (Page 6)

5. Repeat steps 1 through 4 for the second wheel.

6. With help from another person, place beam

assembly on frame and line up four holes, secure

with four hex screws (H), lock washers (I) and

hex nuts (J). See figure 6. Two 1/2" wrenches or

socket is required.

1

BEAM ASSEMBLY

HEX SCREW (A)

LOCKWASHER (I)

HEX IMUT (J)

FIGURE 6

7. Secure the inlet hose to the pump with hose

clamp (F), provided in hardware pack. A standard

screwdriver is required. See figure 7.

8. Assemble the high pressure hose to the pump. A

1-1/8" wrench or adjustable wrench is required.

See figure 8.

NOTE

Use hydraulic sealant tape or pipe sealant

on threads.

FIGURE 7

FIGURES

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments