Mtd 24640-7 User Manual download pdf (Page 5)

FIGURE 6

FIGURE 7

NOTE

After engine has been serviced,

finish filling oil reservoir. Start

engine and operate engagement handle

so the ram makes two complete strokes.

CAUTION

This is to purge the hydraulic system

of air.Continued operation will cause

permanent damage to pump and cyl

inder. Stop engine and finish filling

reservoir tank. It will take about 3

quarts of oil. See figure 4.

USING YOUR LOG SPLITTER

Your log splitter is designed for safe, efficient,

operation. CARE, OF COURSE, MUST BE EXER

CISED THAT HANDS ARE KEPT AWAY FROM ALL

MOVING PARTS.

A. Set throttle at maximum speed.

B. Engagement handle has three positions: Forward-

moves ram towards wedge. Neutral - ram stops

in place. Reverse - ram returns. See figure 8.

FIGURE 8

C. Maximum length that can be split is 23”

D. Place log on beam and hold in place with right

hand. See figure 9.

FIGURE 9

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Mtd 24640-7 User Manual Page 5