Mtd 246-596-000 User Manual

1.00OWNER’S GUIDEOUTDOOR POWER EQUIPMENT for all seasonsSpringImportant:Read Safety Rules and Instructions Carefully2H.P.EDGERModel Numbers246-596-

Mi^9©®в(%* Уlo

Models 596 and 24596PARTS LIST FOR MODEL 596 EDGERy.PARTIMO.COLORCODEDESCRIPTIONNEWPARTREF.NO.PARTNO.COLORCODEDESCRIPTIONNEWPART1712-0107 Hex Cent. L.

MTD PROPUCTS INC ... YaRD-MaN COMPANYP.O. BOX 36900 • CLEVELAND OHIO 44136

INDEXSafe Operation Practices... 3Assembly Instructions...

A(WARNINGtreduce the potential for any injury, comply with the following safety instructions. Failure to comply with the istructions may result in per

NOTEThis unit is shipped WITHOUT GASOLINE or OIL. After- assembly, see operating section of this manual for proper fuel and engine

HANDLE THROUGH SLOT IN FRAMESHOULDER BOLT (A)BELLEVILLE WASHER (B)HEX NUT (D)t2.3.4.Place lower handle into the slots in the rear frame. See

7. Place clutch plate (X) on the left hand side of the upper handle as shown in figure 6. Secure in place with hex bolts (H) and he

OPERATION1. Fill the crankcase with oil using a high quality ^ detergent oil classified "For Service MS". Use SAE 30 oil. Nothing should be

SECONDBOLTWHEELSUPPORTBRACKETFIGURE 12LUBRICATIONEngine - Refer to separate engine manual for lubrication instructions.Wheels - The wheels re

MOUNTING/^ BOLTBELLEVILLEWASHERFIGURE 15ENGINEPULLEYBELT7. Set edger back on its wheels. Replace spark plug wire.OFF-SEASON STORAGEThe following st