Mtd 219-320-000 User Manual download pdf (Page 5)

Hole Provied for

Tailpiece

“U”-Channel

Bracket

NOTE

Wheel hanger bracket must be removed

before the “U’’-channel can be pivoted

down.

2. Pivot the “U”-channel bracket down. Place the

—tailpiece in place in holes provided. See figure 4.

FIGURE 4.

3. Replace hex bolts in frame, which were removed

— in step 1. Tighten securely. See figure 5.

4. Remove hex bolts and belleville washers from front

of frame. See figure 5.

FIGURE 5.

Left Hand

Handle

e Hex Bolt

and Belleville

Washer

Hex Bolt (D)

Belleville Washer (E)

Lock Washer (F)

Hex Nut (G)

HANDLE ASSEMBLY

1. Place the right and left hand handles in place

-------

against the tiller frame. See figure 6.

NOTE

The left hand handle has the clutch

grip preassembled. Refer to figure 1.

2. Start the hex bolt and belleville washer by hand

(removed in step 4) in the bottom hole in handle.

3. Secure the top hole in handle with hex bolt (D),

belleville washers (E), lock washer (F) and hex nut

(G). See figure 6.

FIGURE 6.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Mtd 219-320-000 User Manual Page 5