.50ASSEMBLY » OPERATION » MAINTENANCE » PARTS3-1/2 H.P. LOG SPLITTERImportant:Read Safety Rules and Instructions CarefullyThank you for purchasing
ACAUTIONDisconnect high tension wire at spark plug to prevent accidental starting of engine. Unscrew oil drain plug located on side at
STORAGE INSTRUCTIONSIn event engine is to be stored for any length of time (30 days or more), prepare as follows:. Drain gasoline by tip
241-640APARTS LIST FOR LOG SPLITTER MODEL No. 241-640Arief.No.PartNo.ColorCodeDESCRIPTIONNewPartRef.No,PartNo.ColorCodeDESCRIPTIONNew Part1717-0407Con
241-640A!&2PUSH PLATE WELDED TO CYLINDER ROD3-1/2" DIA. CYLINDER PARTS LIST FOR MODEL 241-640ARef.No.PART No.DESCRIPTIONNewPart1 717-0459C
PARTS INFORMATIONPOWER EQUIPMENT PARTS AND SERVICEParts and service for all MTD manufactured power equipment are available through the authorized
INDEXSafe Operation Practices ... ...3List of Contents in Hardware Pack...4A: :o
IM PORTANTis suggested that this manual be read in its entirety before attempting to assemble or operate. Keep his manual in a safe place for future r
TOOLS REQUIRED:(1) Adjustable Wrench (1) 3/4" WrenchOTHER MATERIALS NEEDED:(A) One gallon of regular grade gasoline (for engine)(B) 1-1/4 pints
OPERATIONService engine with gas and oil. See engine manual packed with log splitter for complete instructions for the care and maintenance
NOTE: The strainer tube assembly is 53" long.4. Drain oil, clean strainer tube and reassemble using a hydraulic pipe sealant on the threads.5.
FIGURE 9USING YOUR LOG SPLITTERYour log splitter is designed for safe, efficient, operation. CARE, OF COURSE, MUST BE EXERCISED THAT H
H. Move the engagement handle to the rear to return ram.MAINTENANCEd)DANGERNever attempt to cut a log in half with the log splitter. See figur
2. Pull off inlet hose from strainer tube assembly and catch oil in a suitable container. See figure 15.3. With an adjustable wrench remove the stra
Comments to this Manuals