SNOW BOSS 500 SNOW BOSS 850 SNOW BOSS 1050Model Nos. 315-616E190 315E646F190 315E666H190Thank you for purchasing an American-built product.(Model 646
Optional Electric Starter: Connect power cord to switch box on engine, then to 120 volt AC receptacle. With the engine running, push starter but
DrivePlateFIGURE 14.AUGER CLUTCH ADJUSTMENTTo adjust the auger clutch, refer to Final Adjustment section of Assembly Instructions.SHIFT ROD AD
AUGERSThe augers are secured to the spiral shaft with two hex bolts and hex lock nuts. See figure 16. If you hit a foreign object or ice
SupportBracketRear Auger BeltFrontAugerBeltFrameFIGURE 19.IdlerSpringAuger Support Housing Bracket SpringDRIVE BELT1. Follow steps 1 through 4 of pre
OFF-SEASON STORAGEA WARNING: Never store engine with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spa
TROUBLE SHOOTING GUIDETroublePossible Cause(s)Corrective ActionEngine fails to start1. Fuel tank empty, or stale fuel.2. Blocked fuel line.3. Key n
Models 616E, 646F and 666H<í АО16
Models 616E, 646F and 666HPARTS LIST FOR MODELS 616E, 646F AND 666H SNOW THROWERSREF.NO.PARTNO.CODEDESCRIPTIONREF.NO.PARTNO.CODEDESCRIPTION1725-1646La
Models 616E, 646F and 666HAl ЬЗ18
Models 616E, 646F and 666HPARTS LIST FOR MODELS 616E, 646F AND 666H SNOW THROWERSREF.NO.PARTNO.CODEDESCRIPTIONREF.NO.PARTN0.CODEDESCRIPTION1618-0120Wo
IMPORTANTSAFE OPERATION PRACTICESATHIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND
Models 616E, 646F and 666H20
Models 616E, 646F and 666HPARTS LIST FOR MODELS 616E, 646F AND 666H SNOW THROWERSREF.NO.PARTNO.CODE DESCRIPTIONREF.NO.PARTNO.CODEDESCRIPTION1—Engine**
Models 616E, 646F and 666HWHEEL DRIVE CABLE6 AUGER DRIVE CABLEPARTS LIST FOR MODELS 616E, 646F AND 666H SNOW THROWERSREF.NO.PARTNO.CODEDESCRIPTIONREF.
iTTHE WHITE OUTDOOR PRODUCTS CUSTOMER CARE TWO YEAR LIMITED WARRANTYFor two years from the date of retail purchase within the United States of America
The Pursuit of Value...OUTDOOR POWERWhite ^loivs theWSciy!The only way to insure the performance of your product is to use original equipment par
CONTENTS OF HARDWARE PACKLay out the hardware according to the illustration for identification purposes. Parts are illustrated approxima
ASSEMBLY INSTRUCTIONSIMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel and
AHACHING THE CHUTE ASSEMBLY (Hardware B)1. Grease the chute opening using a multi-purpose automotive grease or equivalent.2. Place chute ass
CableGuide6. Models 646F and 666H only: Slip the cables that run from the handle panel to the chute into — the cable guide located on top of the engin
AWARNING: If cable is tightened so there is tension on the cable with the clutch grip released, the safety features of the snow thrower may be
CONTROLSFIGURE 12.SHIFT LEVER(See figures 11 and 12)The shift lever is located in the center of the handle panel. The shift lever may be moved
OPERATIONGAS AND OIL FILL-UPService the engine with gasoline and oil asinstructed in the separate engine manual packed with your snow thrower. Read in
Comments to this Manuals