Mtd 243-651B000 User Manual

$1.00OWNEirS GUIDE• ASSEMBLY • OPERATION • MAINTENANCE • PARTS •Important:Read Safety Rules and Instructions Carefully5 and 8 H.P. SHREDDERSModel Num

Models 645B, 648Bi650B^ndNOTE: The engine is not under warranty by the shredder manufacturer. . .If repairs or sen/ice is needed on t

Models 645B, 648B, 650B and 651BPARTS LIST FOR SHREDDERSREF.NO.PARTNO.CODEDESCRIPTIONREF.NO.PARTNO.CODEDESCRIPTION1-4840+ 142 Blade38 736-0119L-Wash.

TROUBLE SHOOTINGPROBLEMPOSSIBLE CAUSE [S) CORRECTIVE ACTIONEngine fails to start1. Spark plug wire (lisconnected.2. Fuel tank empty, or stale fuel.3

S/iFETY RULESAWARNING: TO REDUCE THE POTENTIAL FOR ANY INJURY, COMPLY WITH THE FOLLOWING SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH

ASSEMBLY INSTRUCTIONSATTACHING THE LOWER LEAF RAMP SECTIONHex Bolt-5/16-18 X 8-3/8“ LongFlat Washer 5/16“ I.DHex Lock Nut 5/16-18 ThreadBIMPORTANT: T

Spacers (Inside Hinge)Housing Assembly Hex BoltChute [)ef lectorAWARNING; Make certain the spark plug wire is disconnected and moved away fr

AHACHING THE CATCHER BAGYour shredder is equipped with a catcher bag to catch the shredded material.To attach the bag, place the openin

BEFORE STARTING1. Place the shredder on a firm, level surfaci t.2. Attach spark plug wire to spark plug.3. Service engine with gasoline and oi

FIGURE 10.No Larger Than 1/2" DiameterFIGURE 11.3.To lower the leaf ramp, use one hand to grasp the handle at the top of the leaf

mended at the start of each season; check engine manual for correct plug type and gap specifice tions.Clean the engine regularly with a

NOTE: When reassembling, make certain the opening on the back-up plate is toward the bottom of the unit. The back-up plate may b